Printer: Robo3D R1
Layer Height: 0.3mm
Scale: 0.5 - 1.0 - 1.5
TIme: 0.5 = 48 Minutes. 1.0 = 5 Hours - 1.5 = 10 Hours
Sliced and Printed with Cura 14.03
Layer Height: 0.2mm
Time: 10 Hours
Notes: Use a slightly higher infill say 10-15% this means that there wont be any gaps or issues with the skulls features other than the well known left jaw issue which really needs a remodel or support material to print properly.