Hatch Box, Geeetech PLA
Hatch Box Green, Brown Geeetech Light Blue
Needed to use a negative infill (-0.15) and decreased flow to 90% to get Print-In-Place hinges and Cams to print without fusing. Filing of the rod ends was required to fit into the slots of the turtle fins or the retainers would break. the part that slides in the base also needed quite a bit of sanding and filing to make it move smoothly. Needed to create spacers behind the gears on mine to keep them meshed. Everything printed without supports except for the cam gear. The crank shaft is very fragile and easily broke. I ended up printing several of them. I might try printing that horizontally if I made another.