3D Printer Monitor for OctoPrint Wemos 1.3 Display
Made by earendilin, uploaded
Thingiview
Description
I used a long ESP8266 board on this one, so I snapped the thinggy inside and it worked fine.
The screen was a bit of a tight fit, so I filed a little the inside, but that was ok.
A part from that, nice fit!
Print Settings
Printer:
Alfawise U30 Pro
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20%
Notes:
bed temp 50°C, no brim, no rafts.