Z Top Fix MK2S
Made by mkikia, uploaded
Description
Prusa Z Top Fix
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Notes:
Printed on my Prusa Clone which I built myself. I had to drill out the holes with an 8 mm bit. Fits fine. Printed with PLA as it was all that I had. 3 perimeters, 5 tops and bottoms as per instructions. Did a test fit and all seems OK. Will print motor mounts and then re-check that everything aligns.