Ocarina - fully playable
Made by MothersOfInvention, uploadedDescription
Printed at 0.15mm layer height with 4 top and bottom layers and 4 perimeters and 25% infill. Printed in PLA Easywood from FormFutura.
Glued the two pieces together with CA glue. Sanded away most of the layer lines but a few (i still wanted to show that it is printed). Painted with opaque stain, then airbrushed it also with opaque stain. Lastly sprayed it with 4 layers of clear coat.
Looks, feels and plays like a real wooden instrument.
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
No
Supports:
No
Resolution:
0.15mm
Infill:
25%