I need a box for a chess set that I'm printing and this box generator is ideally suited for my need.
The box size is 100mm x 100mm x 150mm (WxDxH) and was printed using Red Hatchbox ABS on my FLSUN QQ-S.
Layer height was 0.175mm/layer and yielded excellent print quality. The lid was a bit of a tight fit during the initial installation however it slides super-smoothly now that it's on.
I still can't believe that I've managed a 150mm tall ABS print on an open-framed printer with no warping. It's simply incredible!!!
Here's what everything was set to ...
- 5 top & 5 bottom layers.
- 2 perimeters.
- 10% infill.
- 105C bed temp, on glass using Dimafix bed adhesive (this stuff is AWESOME).
- 245C Hotend temp
- 0.175mm/layer height
- 80mm/sec print speed
Box print time was about 10 hours, 30 minutes.
Lid print time was about 1 hour, 50 minutes.