Three Heart Gears
Made by HawkAero3D, uploaded
Description
An awesome series of designs that fascinates and gives a little joy to everyone who plays with them!
Print Settings
Printer:
Creatbot F430
Rafts:
No
Supports:
No
Resolution:
0.18 to 0.22 mm
Infill:
18 to 20%
Notes:
I'm very new to 3D printing so I printed these with a brim to ensure good bed adhesion. A little bit of post-printing work to remove the brims, but it avoided any issues. Printed at 44 to 55 mm/sec with max speed 92% for the infill.
Bit of Wurth HHS2000 spray grease for lubrication worked a treat.