- Looks really cool, like it is a rocket and it is going to fly or doing some tricks.
- If some of the parts broke, you can reprint. So, it is good that it is made from more parts.
At the first look, the instructions are hard to understand. But, you need to spend more time to read. It is not critical, but from the other case it is really good described and explained. I am too lazy to read everything, so I read what I needed.
The piece called "CR-Ender_OEM-MS_Gantry_Adapter_1A" one hole it is incorrect situated. Because of that, this details it is not fixed very good to the metal plate and it is causing a small womble. I guess it can influence at the print and also with vibrations that it is causing. I had to redesign this part, and after 4 tries I could fix that. After I changed to modified part, everything stayed very cool and solid. Better than the previous time.
I don't know for what is piece "CR-Ender_Gantry_Clip_1", because in my case it doesn't even touch the plate of the printer.
If you are using dumpers, and the X motor is situated on the other side (reverse), and at the same time you have a BL Touch upgrade, the hot end will not touch the endstop. So, in my case, I had to remove the dumper on the X axis and place the original position of the motor.
The second hole of the fans, are not fixed. Because of that, the fans wobble.
No space for leds? I am using a version with dual 5015 fans "5015_Dual_Radial_Fans_Dual_Ducts" and I don't understand where I can place the printed led bar.
I guess for a BMG dual drive version, you need another plate. Yeah, I can spend money on that and then replace with the old one, but I guess this method can be avoided with a printed upgrade, because you will need to reassemble everything again. It is expensive and I need to wait for the order like from one to two months.
- So much hex nuts and screws. M3 hex nuts are rare and you can't find them everywhere. I had to order from China.
Conclusion: Worth it? Maybe. At the moment, I am using this upgrade. I don't know if I want to change it, because it works fine and I didn't find another fan upgrade (I didn't search).