First, let me tell you about my printer... I have a 120v heated printbed, yes, 120v. It heats up in under thirty seconds where my old 12v heated printbed used to take about 20 minutes for the hotter temperatures and it couldn't get as hot as I wanted for some materials like polycarbonate. My extruder is an E3D V6 with a PT100 and amplifier plugged into A4 on my sanguinololu so that I can have much higher extrusion temperatures (above 300C) that the old thermistor could not handle. My print area is 200x200x200 and I've found that to be able to handle about anything that I need to print as most of my prints are rather small.
Now about me, I wish that I had more time to be on thingiverse and when I have a chance I will post more of my designs, there are so many that I have not yet uploaded. Oh, and if you have anything that you need changed for your print, just ask, if I have time I can easily make alternate versions of my designs.
I Am A…Maker, Designer, Engineer
Tools I Use…
Printers: Home made and constantly upgraded
Design Programs: BobCAD
3D Design Skill Level