I present a mirror support for decoration doll house
That you can hang anywhere!

To decorate your interior, bathroom, bedroom, living room, children's room of your playmobil

The support has been printed in PLA, and painted with acrylic paint then I varnished them with an aerosol all supports fast drying (inside / outside) for a better holding of the paint

Size for the picture 8 cm in length 3 cm in width and 4 mm in depth

50% Sufficient filling rate if painted thereafter
70% print speed not too fast for better rendering
215 ° PLA printing temperature
60 ° shelf temperature
0.2 layer thickness
0.8 hull thickness
NO SUPPORT

PRINTING TIME 26 MIN

Hollow hexagonal planter made with Hatchbox Wood PLA (see Post-Printing section for information on wood stain). After staining, fill with pebbles (I purchased a small bag of pebbles at the local craft store) and a small plant (I purchased a fake succulent plant on Amazon)

I used Slic3r´s vase mode with three solid bottom layers to print this tealight holder. It is desiged for 40x20mm standard tealights. I would recommend the plastic housed ones due to the transmitted heat from the metal ones.

Acerca de mí: Yo me llamo Gonzalo y soy un mercadólogo digital, pero me encanta hacer videos y tengo una pasión por las impresoras 3D y el reciclaje. Cada semana subo un video nuevo con manualidades y proyectos que involucran mi impresora 3D. Tengo ya más de una docena de videos, por lo cual te invito a que les des una revisada y si te gustan te suscribas a mi canal :)

https://youtu.be/OTe07AQrSbs

A human skull

I plan to put a few of these in a bowl for decoration. I love looking at them, tossing them around, and putting my fingers through the holes.

Simple plan view outline of the F-22 Raptor aircraft. Created as a quick accessory for a gift, but could also be used a ornament, pendant, cubicle décor, etc.

Heart shaped vase

A simple heart shaped vase.

Versions

• Heart shaped vase - solid: print in vase/spiralize mode.
• Heart shaped vase - 0.8mm shell: 0.8mm thick walls.
• Heart shaped vase - 1.2mm shell: 1.2mm thick walls.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/cAlWW6m6p5G

id : sa40011a7
name : dragonfly lamp
size : 190 x 155 x 275 mm
files : 7
pieces : 7
maximum size of the component : 273 x 85 x 27 mm
total print time : 11h:24m
raft : yes
support : no
Applicable Bulb type : tBulb S
Instructions :
1.lampshade infill 100% , Best results
2.Can be used with lampshade http://www.toolmoon.com/lampshade-model.html
https://youtu.be/Zum2mgSkSBY

If you ever need a shelf or a library right away, this is just for you!
You can DIY your own with this Joints and some boards

What you build depends only on you, you can copy the examples above or invent whatever!

Joints must be fitted with wooden boards. For the wood I base on the standard measure 18.5 mm.
You can screw it to the wall if necessary. Check the panels I uploaded with the images for further info.

Byeeeeeeee

Always liked that cool, succulent home decoration? Now you can create your own with our free online 3D modeling tool VECTARY.

Use our 3D templates to create original cactus structures:

Small cactus 3D model template: https://www.vectary.com/l/Cactus-Template-Small
Big cactus 3D model template:https://www.vectary.com/l/Cactus-Template-Big

Just follow our 3D modeling tutorials:

Simply adhere two 1/2" diameter hobby magnets to the back of the holder, insert your favorite air plant, and stick to the fridge!

The upper air plant hole is approximately 0.700" in diameter, which should fit a variety of different air plants.

A new keychain in form of a fretworked blossoming flower !
See the video at https://youtu.be/6XTpnDuUSqU
Push the flower bottom, open the petals and let the flower blossom !
Printed all in once and inseparable.
It is possible you have to clean some material at the beginning in the moving parts.

Look at my " The blossoming flower 1 " at http://www.thingiverse.com/thing:2290058 and " the blossoming flower 2 " at https://www.thingiverse.com/thing:2310167

Have a look to my other gyro Keyrings

• telescopic " open work " keyring 1 - at http://www.thingiverse.com/thing:2228378
  " gyroscopic " open work " keyring collection " at https://www.thingiverse.com/thing:2148303
  "supergyroscopic relaxing keyring - 8 rings", at http://www.thingiverse.com/thing:2067014
  "gyroscopic relaxing keyring - 6 rings", at http://www.thingiverse.com/thing:1307100
  “gyroscopic keyring 11”, at http://www.thingiverse.com/thing:1225044
  “gyroscopic keyring with flower 2”, at http://www.thingiverse.com/thing:1149171
  “gyroscopic keyring with flower ”, at http://www.thingiverse.com/thing:1091961
  “gyroscopic keyring with Thingummies”, at http://www.thingiverse.com/thing:879393
  “gyroscopic keyring 2”, at http://www.thingiverse.com/thing:644217
  and in the collection " My gyroscopic keyrings " http://www.thingiverse.com/gianfranco/collections/my-gyroscopic-keyrings

Visit website for detailed instructions to complete build:
https://www.adylinn.com/blog/2017/3/26/diy-wine-glass-shelf

Thanks for checking out the DIY Wine Glass Shelf build! If you enjoyed it, I post monthly builds using 3D printing on my website, https://www.adylinn.com/builds/.

A candle holder from our Shapeways integration video (watch below)
It was created with our free, online 3D modeling tool VECTARY using the Joints and Wires plugin.
See the original 3D model: https://www.vectary.com/l/CandleHolder

Shapeways is the leading 3D printing service in the world and we are proud to have it as one of our first integrations in VECTARY. You can now send your 3D models directly from the editor to Shapeways and have them 3D printed online in materials like metal, porcelaine, plastic and more. Read more on our blog: https://www.vectary.com/l/ShapewaysIntegrationBlog

Never worry about killing your plant again! Simply fill the resevoir and your plant will water itself! (just remember to check the water level once a week).

I designed this planter to be easy for 3D printing. No supports. No rafts. And most importantly, no leaking!

Snail of the art / Schnecken-Kunst

Elk are one of my favorite animals. They are majestic creatures and their spirits walk the forest floors of the mountains. This sculpture tries to capture their spirit.

This is an amazing hockey puck with the quote "Don't go through life without goals", you should download it now, please.

simple holder for an Ostrich Egg so you can display it Ostrich Egg Display

Just add... more design to your 3D printer...

Enjoy & Happy printing...

This is a mighty neat panel for you to put on your door! For the finish, I used a metallic paint and a matte dark green. The nubs on the plastic are small drops of lead sauter attached to the plastic with ProBond.

Just a small remix to be able to wall mount the HIVE module V3 from dto26.

If you scaled the original modules, you need to apply the same scale on this one.
Also, be aware that the inside length of the module is reduced because of the back being thicker to handle the weight of all connected modules so don't forget to adjust the size of the drawer accordingly.

The screw hole is 4mm wide.

All credits goes to dto26 for his original design

Just a simple planting pot for small plants or something like that.

I hope you like it :)

This is a Weather Forecast Cloud that I built using a Raspberry Pi Zero W along with some NeoPixels. The build guide can be found at https://www.instructables.com/id/Weather-Forecast-Cloud/

As seen in the pictures I had made this on my Shapeoko3 in oak. These files are so it can be 3d printed if you do not have access to woodworking equipment. The design is optimized for wood but can be adapted. When printing the diffuser layer use semi-transparent filament such as natural PLA or PETG.

I have included the Fusion 360 files along with the svg so you can optimize it for your method of making.

Cute bookmark of a little flag! Make your own bookmarks or create a unique gift!

Check our page for more bookmarks and cute supplies ideas and feel free to suggest us new designs on comments!!
We have new designs every week! Stay tuned and follow us!!

Un marcapáginas súper bonito de un banderín! Para hacer tus propios marcapáginas o para un regalo muy original!

Visita nuestra página para más marcapáginas y cosas súper monas!
Déjanos un comentario con tus ideas y nosotros las haremos!
Subimos nuevos diseños cada semana, estad atentos!!

♥ScrapPrinting♥

My second model. This is a designer container for paper, which perfectly fits in the office). Suitable for 87 mm paper.

Multiple version of diamond, from the half diamond wall art to the full diamond in diamond suspender or pendant.

A nice hanging candle holder for the outdoor.

Print one hook, four holders, assemble and enjoy!