This paper clip can be printed in colorful Strong & Flexible Plastic in Shapeways (I checked that).
Shapeways: http://www.shapeways.com
If you give this code QYQ52 you will save 15% for your first print.

You can also buy ready print in my shop: http://www.shapeways.com/shops/fundesign

Created from a jpg

Check out our "Sew easy" group here at Thingiverse.

This is a quick design for a customizable sewing guide that uses two magnets embedded into the guide for holding it in place on your sewing machine.

It can be used with cylinder and rectangle magnets of adjustable sizes. The size of the guide can be adjusted as well.

I did not add code for checking correct sizing boundaries, so choose your values correctly ;) and check your design before using it.

New in this version: I have added the possibility to print testpieces, this helps in testing if your magnets fit into the holes of hte guide. The testpieces are just big enough to cover one magnet, so they are fast to print for rapid testing.

The sizes for the default magnets fit a 5mm cube magnet and a 5mm radius cylinder magnet with 5mm height and the sizes are adjusted to fit my printer setup with a 0.4mm nozzle.

You can also find me on:
Sewing Group at Thingiverse
My Website
Facebook
Youtube
Instagram
Shapeways

It makes a great decoration or coaster, especially if you have access to glow in the dark filament.

~This model was originally created by Kalle Grennfalk~

https://www.youtube.com/watch?v=attjgI3_rxU
full guide on: https://learn.adafruit.com/hydro-dip-3d-prints/overview

Joy Con Grips by: Alex Hatch @hatchmanpro
https://www.myminifactory.com/object/ergonomic-joycon-grip-with-light-pipes-32319

No bear Fidget Spinner by Murray Clark:
https://www.thingiverse.com/thing:2237509

Add Full color graphics to 3D Printed parts!
In this week’s project, we’re hydro dipping 3d printed parts.

Works on moving parts!
Images can actually wrap around 180° – so you can get some nice details on the sides and edges of your parts. We can even apply graphics to mechanical moving parts like this print in place, no bearing fidget spinner!

Hydro dipping also know as Water Drape Film, Water Transfer or Inkjet Water Slide Decal Transfer, is a post-processing technique that allows you to wrap graphics around objects. So with this method, you can add some pretty cool textures and full color graphics to your projects.

Hydro dipping is commonly used on machined and injection molded parts, but we found it also works great on 3d printed parts. So you’re able to add high quality textures and graphics without lots of post processing. It even works with visible layer lines that you get with 3d printed parts.

This is the 'Hamel Monohull', one of the example boats at this year's 'Moat Boat Paddle Battle' at Maker Fair Bay Area 2015.

Find out more at:
http://www.moatboatpaddlebattle.com/

This is an update to the previous Solid of Constant Width that I posted. This time, I made a Customizer! I hope you guys like it! I personally am a little obsessed with them right now; they are super satisfying to mess around with.

Here is a cool Numberphile video over them:
https://www.youtube.com/watch?v=cUCSSJwO3GU

PLEASE NOTE: The second image for this thing is the original trophy that I want to make a 1/2 sized replication. The current thing image is just a rocket design I found so that I could practice using Customizer for the 3D Printing Class I am taking.

Customized version of http://www.thingiverse.com/thing:58704

Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=58704

The original from John1123 used the following settings. I've tried to reset them for the course exercises.

Original using the following options:

scale_wings = 100
scale_model = 100
numerical_slider_2 = 6
numerical_slider_1 = 60

The current main image shows how the thing looks using the following options:

numerical_slider_2 = 3
numerical_slider_1 = 101
scale_model = 80
scale_wings = 141

Custom Knob to fit various size hex bolts. Measure the hex inscribed in the circle from furthest point to furthest point. The knob can be customized to fit any size hex bolt, just enter the parameters.

Current STL is for a 1/2" size bolt.

Caffeine molecule.
You can create necklace, earrings or pendant.

Embrace this molecule partially responsible for your happiness and print yourself a key ring.

It's fairly intricate so I recommend a slow and thin first layer for good adhesion. Eg: 10mm/s, 0.15mm

I've borrowed 6 colors from uncle Dutchmogul and now my little bug has 6 different colored butterflies. She's firmly 2 now, but still likes her butterflies!

This one's an inkscape render from an artist who's name I couldn't find, but I appreciate greatly. Thank you!

The second pic is butterfly corner as of 2/7/15...it's coming along!

This fractal style pendant has been created in just a few minutes with the 2d to 3d application "eXtrudy": http://www.thingiverse.com/thing:157322

https://youtu.be/1QY6nZaLJlc

This is a 3D printed truck riser with integrated NeoPixel LEDs. These headlights are bluetooth controlled via iOS/Android Bluefruit app. Wanna build one? Parts and full instructions are listed in the learning guide: https://learn.adafruit.com/3d-printed-truck-risers-with-neopixel-leds/3d-printing

Adafruit Feather Bluefruit nRF52
https://www.adafruit.com/product/3406

8x NeoPixel Stick
https://www.adafruit.com/product/1426

Revised version of http://www.thingiverse.com/thing:1884080
The chassis is now a lot less bulky and consists of multiple parts, the pulleys move more easily now.

Before printing everything it is best to print a couple chain links to see if they work. When using multiple links per step the chain link with the socket on top can be used to connect both the horizontal and vertical parts of one step, the link without the socket can be used in between. The pulley should be big enough that the chain with the mounted steps can bend around it, so it is best to print one of the pulleys next to try that out. The pulleys with the mounted chain are placed on the axes in a way that the hole in the chassis aligns with the square hole of one of the pulleys. Make sure the pulleys rotate easily. You will need 12 pins to assemble the chassis and mount the handle and stands. Inserting the pins can be quite tough, I did it carefully with pliers and a hammer. The crank can be joined with the handle and mounted trough the hole of the chassis with pins. The pictures should give a good overview how the parts connect together.

Might be a little small for an adult but it prints with out supports and looks rad.

A 3030 T-slot with customizeable length.
Open in the customizer app and change the length.

Print your own Venetian mask. Paint it!

More info: http://diwo.bq.com/builds/imprime-tu-mascara-para-halloween/

Author: http://www.soniaverdu.es/

This is a simple clamp for holding bundles of wires, cables, or even pneumatic hose.

Edit: Here is a modified version by 'robkingva' which allows you to snap the parts together!
http://www.thingiverse.com/thing:715328

An update to thing:697545 by MechEngineerMike to make it snap-together. [3/10/15 update: sorry for the duplicate files in the first version... it's my first upload]

I've wanted a map puzzle for as long as I can remember. But all I could find were jigsaw puzzles with maps drawn on them, instead of the map-shaped pieces I wanted. Now that I have a 3D printer I can design my own puzzle of the artificial borders which humans put between themselves!

Central America
http://www.thingiverse.com/thing:11112

Africa
http://www.thingiverse.com/thing:11159

Europe
http://www.thingiverse.com/thing:11216

3D printable puzzle tutorial
http://myshumi.net/2011/08/29/3d-printable-puzzle-tutorial/

More info and pictures here:
http://myshumi.net/2011/08/28/map-puzzle/

I would love to keep sharing my projects with all of you. If you enjoy with my designs, I invite you to become a patron, you will get early access to my designs and exclusive content! Also, you can help with a small donation.

Patreon: http://www.patreon.com/flowalistik
Donations: http://www.paypal.me/flowalistik

Simple and easily printable cat ring. No 3d printers were harmed during the design process.
This animal-based ring is part of the collection Ear Rings. You can take a look and download them in any size you want!
http://www.thingiverse.com/FLOWALISTIK/collections/ear-rings
I've uploaded the STL file for sizes from 5.5 to 11.5. The sizes correspond to the USA and Canada standards, but here you have the list to know the diameter if you don't know your size.
Size - diameter (mm)
5.5 - 16.10mm
6 - 16.51mm
6.5 - 16.92mm
7 - 17.35mm
7.5 - 17.75mm
8 - 18.19mm
8.5 - 18.53mm
9 - 18.89mm
9.5 - 19.41mm
10 - 19.84mm
10.5 - 20.20mm
11 - 20.68mm
11.5 - 21.08mm
IMPORTANT: as the ring size is not very big and every printer has different settings, the diameter could be slightly different when printing it. Be careful!
Hope you like it!

https://www.youtube.com/watch?v=BNUuwJpeilM

Read the full guide on: https://learn.adafruit.com/breath-of-the-wild-guardian-sword-led-3d-printed/

This is the Guardian Sword from Zelda, Breath of the Wild. It’s fully 3D Printed and has a ton of NeoPixel LEDs. This thing is super bright and looks so awesome!

The blade is designed in Fusion 360 using reference images from the game. Its designed to be 3D printed in several pieces and connected together using screws.

The sword is pretty massive, it’s about 34in in length and has over 90 NeoPixels.
Once I got it in the game, the first thing I thought was, wow this is so cool, I have to make it!

The Easter Egg Dispenser Bunny is a fun and decorative easy-to-print design for use over the Easter season. The Bunny features a 'flip-top' head so you can load mini chocolate Easter Eggs into an internal channel that runs around the back and out the bottom at the front. A 'stop' is designed in at the bottom to hold the Easter Eggs from rolling straight through so they can be 'dispensed' one at a time. When the presented Easter Egg is removed the rest shuffle down the internal channel so the next is ready to be dispensed...

At standard scale he dispenser measures 150mm x 105mmx 35mm and will take mini chocolate Easter Eggs measuring up to 28mm x 22mm (The channel at standard size measures 30mm x 23.5mm allowing 1.5 to 2mm rolling clearance). If you have a large enough build plate the design can be scaled up uniformly to accept larger Easter Eggs. TIP: Please measure the Easter Eggs to be dispensed 'before' printing to ensure they will roll freely in the internal channel. If not, scale up to suit (Calculate the increase required including allowing for rolling clearance).

Make sure you roll your Easter Eggs in sideways so they roll through the internal channel. You may need to hold the first egg in (bottom egg) during loading otherwise following eggs being loaded may have enough momentum to knock the previously loaded eggs out (i.e. dispense them all at once).

Before loading your Easter Eggs check the internal channel is free of print debris and as smooth as possible so the Easter Eggs inside can roll down with the minimum possible resistance. A well printed dispenser should have no/very few printing imperfections affecting the channel... but if you have some cut them away or sand smooth.

Removing / dispensing Easter Eggs is easy... just gently remove the available egg. The remaining eggs inside will move down a space. Please note that removing eggs slowly / gently will ensure the remaining eggs inside cannot gain enough momentum to roll down and jump the retaining ridge / stop at the end of the channel (i.e. The retaining ridge could have been made bigger / taller but this makes the eggs harder to remove... so it is a trade-off between easy to remove eggs and eggs being well held in place).

This is purely a fun Easter thing. It has been designed to be an easy one piece print with two components. The clearances applied are intentionally loose so it should print well regardless of the slicing app or machine used (as not all slicing apps or machines produce the same results).

The notch at the front side of the joint is purely for alignment purposes to help ensure the head sits straight in its lowered position.

2-PART VERSION: Lots of people with machines with small build plates asked for a way to print this design. For this reason two additional .stl's have been provided which allow the body and head to be printed separately then slotted together so the bunnies head flips open/closed as usual. Please download the 2part - A/B stl's for this requirement. Please also note that this version has not been test printed... but it should be fine as this is a minor revision to the original one-piece version which prints well every time.

Great fun...print in you choice of color/s and make sure you have plenty mini Easter Eggs on hand. The hard part is keeping the Easter Egg Dispenser Bunny stocked with eggs!

And, check out my Easter Egg Holder Bunnies as well. http://www.thingiverse.com/thing:1411956

Please refer to the print setting and images for additional information... and post images of your Easter Egg Dispenser Bunnies in use for others to see.

Note: If you like this check out the rest of my fun and practical designs

Easy print of a dragon with wings. This is the dragon equivalent of the popular MakerBot Mr. Jawz print. Square section so it prints flat on a raft.

Note: The orange dragon pictured is the final version. It has an additional spike on the top of its head compared to the green one.

If you like this take time to check out my other designs!

The original cute dragon is a nice modell, but quite hard to print. I made a few changes so it can be printed out of the box without trouble:

.) Scaled it down a bit (it was too big for my purpose)
.) Cut the feets a tiny little bit to get a flat surface so it can be printed.
.) Add manual support in Meshmixer to make it printable without tons of support material and hughe cleanup.

Spiderman Symbol

Printed with the BCN3D Sigma R17, an independent dual extruder machine: https://www.youtube.com/watch?v=Uo9wGzFq-uI

More awesome designs and prints: https://www.instagram.com/bcn3dtech/

The Hollow Draudi is designed to be created on resin 3D printers mainly due to their empty geometry. In addition, all orifices, modeled with Rhinoceros and Grasshopper, give it a unique personality and a plus of difficulty that will challenge any 3D printer FFF.

Check out this cool timelapse printing the hollow draudi: https://www.youtube.com/watch?v=sWcapmmzpVg

https://youtu.be/F-vy7oo59UE
In this project, I wanted to make a case for the Raspberry Pi 3. Check out the documentation for this project for more info!

https://learn.adafruit.com/wood-case-for-raspberry-pi-3/overview

Othermill Pro:
https://www.adafruit.com/product/2323

Raspberry Pi 3:
https://www.adafruit.com/product/3055

Appareil photo sténopé à imprimer

Assemblage de onze pièces imprimées en 3D, de quelques vis, d'un morceau de canette de soda et d'une pellicule photo 35 mm, le sténopé 3dPrintedPinhole35mm est extrêmement facile à fabriquer et à utiliser.

Vous trouverez tous les fichiers nécessaires pour avoir le votre !

Pinhole photo camera to print

An assembly of eleven 3D printed pieces, a few screws, a piece of a regular soda can as well as a 35mm photo film. The3dPrintedPinhole 35mm is highly easy to manufacture and use.

You will find all the necessary files to make and have your own !