This is a mashup(ModernGnome) of a mashup(MustangDave, the original). Thank you fellas for the fine work. I added hinges and weapons on either side of the box. The weapons on the hinge side are part of the hinge. Hinge pins are not included, I'm using small fasteners. Clothing hanger wire should be perfect. I may try to come up with a non pin type of hinge that folds over but that is for another day. Enjoy!

Printed on my Flash Forge Creator pro using Hatchbox wood.

I owe credit to other authors for the weapons I added to the box, need to track them down, will add.

Update:
Found the flail I used by KingRahl, credited.

Found the Darius Axe by Bluesroq, credited

This is a Hairy Lion. As the name says it is lion with hair.
This is a remix from Geoffro's design Lion HD (no supports required).

UPDATE #2: I made about 3 times bigger version. It has a lot of hair and they are also very long.
Watch Joel Telling's (3D Printing Nerd) video about it: https://youtu.be/OTXPU2P-ElE

UPDATE #1: I made 50% smaller version. It should only take about 1-2 hours to print. But you must be much more careful when cutting the hair. This model has much less hair, so if you break or pull out too much hair, there will be visible bald spots.

The hair is connected to sacrificial wall, which is removed afterwards.
(See picture: post_processing.jpg) You can also try hot water to form the hair. Anyway, be careful not to burn yourself.

There was a request to add a brim to sacrificial wall. So I made it: "Hairy_Lion_with_brim.STL"

This was printed with ABS, but it should also work with other materials. If you are having problems, adjust bridging settings in your slicer.

You can find dual extrusion version here: http://www.thingiverse.com/thing:2050208

I found this 3D scan by Lin Lin (http://www.123dapp.com/obj-Catch/wolf-head/1510385) and made it 3D printable with MeshMixer.

I fixed holes, sculpted a bit and scaled and oriented the mesh on a flat plane/base.

http://www.3dwp.nl

This is a lion sculpture holding a welcome sign.

I scaled and oriented the mesh with Meshmixer and cut a flat plane as bottom.

I found the original file here: http://www.archive3d.net/?a=download&id=d516e3ec

http://www.3dwp.nl

Laser cut templates for Infinity N3. The large drop fits inside the smaller one. Has some cool etchings you can personalize too.

Send pictures if you make them!

If you like the projects on my Thingiverse, consider giving a tip. Not only I will appreciate it immensely, I promise to put it to good use. Thanks for your consideration!

Heyo all! Here is a very fine set of Tokens for Malifaux. Although they're designed with that game in mind, I think they'll do great for any other weird west or terror game around. They are free for personal use, of course.

If you like the projects on my Thingiverse, consider giving a tip. Not only I will appreciate it immensely, I promise to put it to good use. Thanks for your consideration!

Do you play Infinity N3? Well, Play better with the power of laser cutting and awe-inspiring Shilouettes for calculating cover and LOS. The height has been compensated along with the base (In fewer words: same size as printing them from the paper templates on the page)

Send pictures if you cut them!

If you like the projects on my Thingiverse, consider giving a tip. Not only I will appreciate it immensely, I promise to put it to good use. Thanks for your consideration!

Who doesn't love Ghibli Movies?

Long story short: I needed a spicerack, and took the long way around instead of just buying one. And since i'm an animation freak... well.

The spice rack accommodates 4 tall bottles on every level. For a total of 12. You can make it longer rather easily, or cut two without the extra silhouette facing and join them. Nail / Mounting holes included.

Send pictures!

If you like the projects on my Thingiverse, consider giving a tip. Not only I will appreciate it immensely, I promise to put it to good use. Thanks for your consideration!

I bought a mounting arm for my Cintiq 13 HD. As any owner of that tablet knows, the device does not include a VESA mount behind, making it impossible for it to be strapped to a monitor mount, ergotron/some other brand's arm, or a support of any sort that uses the VESA standard. I figured there was an easy, cheap way to do this safely, and I'm sharing it so others can do it as well.

The tablet is held from top and bottom, and when correctly assembled: No hardware actually touches the tablet. You won't damage it. I've stress-tested it to and fro and it works like a charm. ¡Enjoy!

Disclaimer: READ THE INSTRUCTIONS.

If you like the projects on my Thingiverse, consider giving a tip. Not only I will appreciate it immensely, I promise to put it to good use. Thanks for your consideration!

A very sturdy brush rack! Place tools, brushes, and more! As simple and useful as it gets.

This file is a free laser-cut file that is part of the Märchen Patreon Initiative. I create amazing Laser-cut accesories and terrain for miniature wargames. Visit at https://www.patreon.com/marchen?ty=h and if possible: support this effort.

If you like the projects on my Thingiverse, consider giving a tip. Not only I will appreciate it immensely, I promise to put it to good use. Thanks for your consideration!

It's Mumei from the anime series: "Kabaneri of the Iron Fortress". This Bust from the main character prints super-well on resin printers, and is a really fun project to paint. It is hollow on the inside and includes an optimized STL with holes for the Form 1+ (so as not to create a vacumm).

She was born from an evening of Zbrush sketching. Hope you like her!

If you like the projects on my Thingiverse, consider giving a tip. Not only I will appreciate it immensely, I promise to put it to good use. Thanks for your consideration!

It's Kaho! From the game: Momodora IV, Reverie under the Moonlight. I decided to do this fanart using it as an exercise during a class I teach on Zbrush modeling. Modeled in 3 hours work for the presentation!

The file itself is scaled to fit with games like Super Dungeon Explore. Have fun coming up with stats for her! If you print her at any scale, please send pictures! And remember that it is a fanart from a game, so don't sell her.

You can check out the original game here:
http://bombservice.com/

Terrain tile for Kingdom death representing (or in this case, substituting) the column terrain piece on the base game. Hope you like it and register a make here! Bring on the pictures!

By the way, tips are super accepted! I can buy figures with that! :D

Also, please: don't sell them, they're for your personal use. You can print them for your friends, of course.

Terrain tile for Kingdom death representing (or in this case, substituting) the large face terrain piece on the base game. Hope you like it and register a make here! Bring on the pictures!

By the way, tips are super accepted!

This is more of a love letter to my favorite wargame than anything. So, this is easy. It's basically EVERYTIHNG you might need for warmachine. Flags, Templates, Proxy bases, health gauges, blast keys, objective areas, Front/Back arc paint jig, The works!

My objective here is that you will NOT need another template set if you build this one. An optional idea is to cut in acrylics since a lot of this works best if you can write over it with a dry-erase marker (like the objective HP boxes).

So... Why beta? Mainly because I'm releasing it as that so that people can criticize it and suggest some ideas. So, Fire away!

Note: The Blast template has a sort of strange option you might like: Basically, it's the measurement ruler that looks like a dented line. You mount that below the template cut in acrylic, and use the cut brackets and either some glue between the brackets (with care that the disc can move along the line's channel) or a nut and bolt. This allows you to use a blast template that you can measure deviation in one swift move. Try it!

Remember, a tip is always appreciated. A comment and a photo is appreciated as well!

THE BLOBS ARE HERE! Evil and unstoppable, they assault your gaming table in three distinct and terrifying sizes. Print them today! And if possible, throw in a tip!

Very nice order from a customer that I had to print so I made it printable!
Enjoy ;-)
Resized to fit 20cmx20cm buildplate

Model of a Dodge Viper GTS.

It has no special scale and should be printable. If anything is wrong with the files, contact me.

Made with Blender, Meshmixer and Microsoft 3D Tool.

Please no design requests.

This is a bust of The White Lady as seen in the Syfy Original Series, The Magicians.

The rarest of all the creatures that reside in Fillory are the one-of-a-kind Questing Creatures. The White Lady is one such creatures. These diverse beings possess unique profound powers. If caught, they offer various magical gifts - but they can also be quite cryptic and unpredictable.

Based upon Lev Grossman's best-selling books, The Magicians centers around Brakebills University, a secret institution specializing in magic. There, amidst an unorthdox education of spellcasting, a group of twenty-something friends soon discover that a magical fantasy world they read about as children is all too real— and poses grave danger to humanity.

The Magicians airs Wednesdays at 9/8c on Syfy!

http://www.syfy.com/themagicians

Syfy is a division of NBCUniversal. ©2017 All Rights Reserved.

Original designs created and printed in collaboration with Voodoo Manufacturing. https://voodoomfg.com/

REMIXED MODEL IN MESHMIXER...

ORIGINAL BY Marchen Atelier:
https://sketchfab.com/models/8726579e5f1c47c68a3f3d4aba7c756b

NEED SUPPORT TO BE PRINTED

The Eiffel tower by CheeseJam is great to print since I couldn't print the tower using the origianal version when I scaled down to 100mm height. This version has scaled up details so that I hoped to print, but there is mesh imperfections around bottom arches. So I imported the solidworks file and resave to STL file. It does not have any open meshes now. To some advanced printing software the inverted triangle normals can be corrected automatically, but my own software does not. This model is great and I'll give it a try using my own DLP printer!

Batman mold.

Basic mold for Wax candle but havent tried that yet. as a sample used play dough to test.

Animal themed dominoes. I made these for my toddlers so that they could learn the mechanics of a common board game in an easier to understand method (animals instead of dots).

Now I create them and give them to friends who also have kids.

Snow Flake Christmas Tree Ornament

I cut at 25% speed, 100% Power on my Full Spectrum 40W hobby laser on 1/8" plywood from woodcraft (found at amazon.com as well). Once cut, glue it.
I keep accumulating these paint bottles. I have a drawer full of them. It is taking me too long to find the one I want when I need it. I am trying to group them by use. (There are some sets I use for Flames of War Americans, a different set for my Warhammer Orcs & Goblins, etc). Maybe this will help me find them faster. It also allows me to pull them out of the drawer all at once.

You should be able to get the whole thing cut out of a single 12" x 12" (square foot) of material. (Redesigned to make it thinner.)

screw 2 line 8 mm
pitch 2.8

:) That's wrong ☻
the screw is counterclockwise.
update file attached.

Tetrahedron

eagle