This is small food dish for my parakeet. It hooks to the inside of his cage and has a perch for him to sit on while he eats. I printed it in PLA on my Creality CR-10 using Cura set to the recommended settings for fine (0.2mm). I used 200 degrees Celsius for nozzle and 60 degrees Celsius for bed. It took about 6.5 hours to print and used about 20 grams of filament. I suggest using support as the perch is raised up on the dish. I used a brim for bed adhesion to blue painters tape rubbed with isopropyl alcohol. The print went very well and the dish works great. The support material was easy to remove. I did drill a small hole in the back of the dish to secure it to the cage with a twister seal for safety.

Split in 4 parts to be compatible with my printer.

I added also pins and holes to help to align and glu it.

Hand Spinner - Fidget Toy !!

Bearings used 608zz or 608rs
Printed in PLA, the handles are optional.

NEW HANDLE V2 !!!

• Added new handle, much more efficient and it fits perfectly in the bearing.

https://youtu.be/wK8wzwtpHoE.

Share it if you print it !!!