Thingiverse - ant0ni0's Things https://www.thingiverse.com/ant0ni0 Fri, 14 Jul 2017 10:33:54 +0100 FeedCreator 1.7.2-ppt (info@mypapit.net) en-us Copyright 2017, Thingiverse.com Tablecloth Clips for Garden Table https://www.thingiverse.com/thing:893187

The edges of this garden table are too high for classic tablecloth clips, so I designed a clip that fits nicely. Drawn in BricsCAD.

]]> ant0ni0 Mon, 22 Jun 2015 18:56:55 +0100 https://www.thingiverse.com/thing:893187 BricsCAD Chair https://www.thingiverse.com/thing:874973

The chair model featuring in BricsCAD's LookFrom widget!
http://bricsys.com/en_INTL/bricscad/

]]> ant0ni0 Wed, 10 Jun 2015 21:06:56 +0100 https://www.thingiverse.com/thing:874973 Filament Storage - Quick Change https://www.thingiverse.com/thing:859426

This is a combination of two ideas:

Filament Storage Solution (wstein)
Filament Quick Change Roller (Tony_D)

I liked wstein's Ikea box storage solution but the roller wheel system makes it much easier to change one of the spools.

Still not perfect: the rolls tend to "derail" sometimes, especially when the box is not filled completely. I have ordered some 608ZZ ball-bearings online and plan to use 4 of these and two pieces of PVC tube, instead of the small roller wheels. That way, all the spools will roll together, but probably smoother. If it works, I'll post an update!

]]> ant0ni0 Mon, 01 Jun 2015 20:19:23 +0100 https://www.thingiverse.com/thing:859426 Expedit/Kallax parametric scale models https://www.thingiverse.com/thing:853886

Customizable scale model of Ikea Expedit/Kallax shelving units!

http://www.ikea.com/us/en/catalog/categories/series/27534/

STL files included for Expedit type at 1/10 scale. Open in Customizer, or edit the OpenSCAD file for more control.

]]> ant0ni0 Thu, 28 May 2015 21:36:43 +0100 https://www.thingiverse.com/thing:853886 Felix Heatbed Isolation https://www.thingiverse.com/thing:800313

The heating of the Felix's heatbed was very slow and it refused to go higher than 88 degrees. I added an isolation sheet made with a piece of cooker hood filter, and attached with 3D-printed clips. Now the bed heats up to 100 degrees without a problem.

]]> ant0ni0 Wed, 29 Apr 2015 21:08:28 +0100 https://www.thingiverse.com/thing:800313 BricsCAD Logo https://www.thingiverse.com/thing:798071

Drawn in BricsCAD

I didn't design the logo, just extruded it to the third dimension :)

All credits go to the Bricsys design team...

http://www.bricsys.com/

]]> ant0ni0 Tue, 28 Apr 2015 18:24:40 +0100 https://www.thingiverse.com/thing:798071 Reinforced Coathanger Hook https://www.thingiverse.com/thing:798008

I have this coathanger with plastic hooks that are all breaking over time. Now with my 3D printer I can print replacement hooks! There was still a problem though. The printed hooks break rather easily. This is now fixed by printing the hooks with a hole in the middle, in which a steel nail is fitted! Drawn with BricsCAD.

]]> ant0ni0 Tue, 28 Apr 2015 18:04:32 +0100 https://www.thingiverse.com/thing:798008 BMW K100 Choke Lever Cap https://www.thingiverse.com/thing:768601

Replacement cap for choke lever on BMW K100, K75 and maybe some other models

]]> ant0ni0 Sun, 12 Apr 2015 17:28:42 +0100 https://www.thingiverse.com/thing:768601 Parametric Atomium Model https://www.thingiverse.com/thing:766885

Customizable atomium model: the default values reflect the real dimensions of the Brussels Atomium (scale 1/1000). You can modify the sizes, and choose to build a model of the Atomium building or just the iron atom.

The model is probably not very suitable for printing, it will require lots of support material. I'm planning to make an alternative version with separate parts, for easier printing.

UPDATE: there seemed to be a problem in the Customizer, it appears not to accept decimal values. Changed parameters to integer values, now it works.

]]> ant0ni0 Sat, 11 Apr 2015 12:25:08 +0100 https://www.thingiverse.com/thing:766885