Brackets to allow you to use 213X200X3mm glass as a build plate on the Printrbot Metal Simple 3d Printer. I had to replace the Auto Leveling Probe with a 7mm variant although I am told you could use a piece of sheet metal under the glass or aluminum tape spots on top.
R1, R2, L1, L2 can be printed on any Simple Metal and joined using the included ties. Right and Left can be printed whole but you will need a larger print bed.
I remove glass and aqua net spray every few prints. If print is not coming off easily, place glass and print in the freezer for a few minutes. The print will pop right off.
I used standard Simply3D settings. 20-25% infill.