Shoulder Rig - compact middle_piece
by MarcusWolschon, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The middle_piece of the 3d printed shoulder rig can be quite hard to print on smaller printers like the Thing-o-Matic.
(I printed the original rig on a RepMan.)
It's long cross-section may induce warping and it streches the limites of the build-platform.
This one is more compact.
It works for the center-support of the camera-plate, the counter-weight and the follow-focus.
2 additional holes in the shape of an M5 nut in the camera_place may be required to use this as the front and back middle_piece to support that camera_plate with the compact middle_pieces as well.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Shoulder Rig - compact middle_piece by MarcusWolschon is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving MarcusWolschon a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure MarcusWolschon would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).