Mobius Action Camera protective cases for Lens:
No screws required! Simply pop in your Mobius and 'snap' the cases together!
Designed for optimum clearance and protection of the lenses.
Only tested with the above lens types. Unsure if compatible with type B and C lenses (If you try these please let me know).
Approximate weight of Mobius A chassis is 10g, C2 is 12g.
The lens hood is not visible in the camera recording.
Print in any colour you wish. The white and orange cases do not glare into the video recording when in full sunlight. In fact it may be advantageous to print in a brighter colour so it's easier to find if it gets lost in bush or tall grass.
Optional incline platforms of various degrees: 10, 15, 20, 25, 30.
Incline platforms include slot for velcro strap.
Approximate weight of incline platforms are 7g.
Print the top and base cases that match your Mobius camera lens type.
Incline platforms optional.
Recommended printing parameters:
- 0.2mm layer height
- 2 perimeters / 0.8mm shell thickness
- 2 top/bottom layers / 0.4mm top/bottom thickness
- Infill 20%