Loading
Sbmarketing

Raspberry Pi 7 in LCD Touch Screen Stand

by Sbmarketing Sep 17, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

So v2 is upside down, for me at least. The power connector is facing down, which will NOT work. I guess I'll have to flip the screen 180°....

But thank you for this, I like the simple design. It's effective and didn't take 12+ hours to print. It only took like 3-4. Finding screws the right length and with the right threads took a while though, it should have came with some...

For those wanting back cover, standard acrylic cases found on ebay + a long set of screws can be used. Depending on which case you buy, you may need to dremel a small amount, or leave out a layer or two I have found.

looks cool is there any way to cover the back more?

Thanks for the model - I have made one.

PS: I think there is a fillet in the wrong place - there is a fillet missing on the front left vertical corner as the other three corners have fillets - also the left vertical does have a fillet at the front on the left side so maybe that fillet should be on the base.

Thank you for this! works really great!

Comments deleted.

How about some protection of the open hardware at the back? If it falls backwards, something possibly gets damaged