Alternative tilt mechanism specific for RCExplorer Tricopter V3 and mini.
Reduces the mass (of the motor) the tail servo has to move in order to correct yaw.
This is not the cure for tail wag - but might give a slight competitive advantage in tight cornering.
Also it serves as a servo saver as the motor holder will break before the servo does.
The low profile version will not fit the new Emax RS2205 motors as they are too low profile to clear the servo. It is not needed though as the standard RCExplorer tilt mechanism works great with the RS2205 motors.
Designed to be printed without support. The built in support is 0.2mm and breaks away easily. Use an exacto knife to clean up the tilt.
If you are having problems with the tilt breaking with the DYS BE2217 1300Kv motors try the "Impossible Tilt Massive V6" edition.
If you are having issues with the servo gears breaking, try the "Servo holder lower" servo holder.
Testing on the bench
First test flight - PIDs are off
Designed using Autodesk Fusion 260 Ultimate