Ball joint phone mount with tripod mount
by anoved, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a set of easily printed parts that can be used to make an adjustable mount for a phone that clamps onto a small PVC pipe, which in turn can be attached to a tripod. My purpose is to make a highly adjustable stand that can be used to record pictures, videos, and timelapses of art and DIY projects.
Phone clip is sized to fit my iPhone 5c. The device cross section is 9mm x 60mm.
Published as a public OnShape document titled Tripod Pipe Clamp.
Fun fact: the ball joint parts are compatible with RAM brand mounting hardware (see the photo with black clamp arms).
Update: Make clips for different size phones by clicking "Open in Customizer" and entering the dimensions. Thingiverse will generate the STL for you in a few minutes. Not quite as fancy as the Onshape version, but a little quicker/easier to customize.
Update, 2 Jan 2016: Added a
Tripod_Ball.stl part for attaching the phone mount directly to a tripod without a pipe or the pipe clamp parts:
0.3 mm layers
10% Archimedean chords
All parts print without support. I used 3 perimeters, 3 top/bottom layers, and 10% Archimedian chord infill in Slic3r.
Tripod clamp requires a 5mm ID nut to grip tripod bolt. Doesn't get much bite with most tripods, so this is the weakest point in the whole kit. (I may redesign it.)
Tripod clamp requires two M3 bolts and nuts.
Ball clamp requires one M3 bolt and nut.
Ball clamp arms held together with a 5mm threaded rod and pair of wing nuts.
I use a length of scrap 1/2" ID PVC pipe. The exterior diameter is actually about 21.5mm.
Of course you can use whatever hardware you have lying around. If you need different dimensions, copy the OnShape document and alter the dimensions.
Select a service to print this Thing and ship it to you
Ball joint phone mount with tripod mount by anoved is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving anoved a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure anoved would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).