by Zaggo, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Better Living with MakerBot, Episode 2
You probably all know this situation:
You're supposed to ref a soccer game in less than 1/2 an hour and you cannot find your whistle. You're screwed!
But from now on you're out of trouble: Fire up your trusty MakerBot and print a new whistle in 26 minutes!
This object prints the pea right inside the whistle. Since the pea is connected to the rest of the object only at one tiny point, it's quite easy to break it loose after printing with a small screw driver or tweezers.
I probably pushing luck a little bit with bridging the top layer. So far I printed the whistle twice without problems.
As always, I added the object as .obj file (wavefront), which can be imported into AOI and Blender.
The gcode file is the one I used to print the whistle on the image. The gcode file contains an experimental raft with additional "blobs" on the second (interface) layer.
You might want to generate your own gcode file with skeinforge settings, tested with your MakerBot. Be sure to setup Skeinforge to create an (almost) watertight object, since the whistle won't whistle if it's full of holes...
I added a second version of the whistle. "Whistle_v2" is an attempt to fine tune the object a little bit. My brother (he's a pipe organ builder) gave me some tips how to optimize the whistles mouth. Whistle v2 should start whistle with less airflow than v1 and thus be (somewhat) less loud. I also downsized the pea a little bit and changed the shape of the lanyard loop.
Whistle v1 is still available for reference and also since it's more "tested"...
Since you blow the whistle with your mouth, be aware of possible problems concerning "food safety" of printed plastic. See the blog post "For foodies out there" ( http://blog.thingiverse.com/2009/09/13/for-foodies-out-there/ ) for more information.
- Print the whistle
- Use tweezers or a small screw driver to break loose the pea inside the whistle
- Annoy your neighbors by blowing your new whistle
Edit, personalize, or revise this Thing
Whistle by Zaggo is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Zaggo a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Zaggo would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).