I love my audiophile equipment and I wanted to take my iBasso and FiiO with me on the go. Unfortunately I did not like stacking the two devices with the loose elastics which came with the Fiio so i decided to design and print an all in one case.
This case is designed to get on nearly every button on both things. Only the bottom part of the iBasso is not directly accessible. But while using the FiiO this of cause is not necessary ;)
This case has an special blocking mechanism for the iBasso player because it is shorter than the Fiio and without it it would be loose inside the case. Therefore keep in mind to insert the IBasso before the Fiio (see the white circle in the pictures)
You are also able to directly connect an other audio sorce to the Fiio without having to unbox the whole case.
Please let me know if you have suggestions on this design. I will note them.
See my blog: http://konkludenz.de/
Use supports to print this object. The huge overhang from the display and buttons will cause some trouble without helpings. Especially for the cover i would recommend to print with 100% infill because of the stability of the hooks.
The printing time for me with 0.08-lineheight takes:
- ca. 10,5h for the Case
- ca. 2h for the cover.
I would recommend an lineheight x <= 0.1 for an smooth surface and an better adhesion between cover and case. Also the hooks for the locker system need some fine accuracy.
Designed in Inventor Pro 2016