Xiaomi Yi ZMR 250 Mount

by cudbur Oct 13, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

Hey! I love this mount! Can you make a 25 deg version?
Thanks in advance!

What happened to the 30deg version?

I removed the old versions because feedback pointed out errors, but I just uploaded a fixed 30 deg version. Let us know how it goes.

Printed the 20deg rev B and the holes don't align with the ZMR frame. The rear set of holes on the mount is perfect. The hole spacing on the front pair is off. They need to be 2.5 mm closer together from center to center.

Uploaded a 20deg Rev C. The front holes weren't properly constrained and were off by 0.6mm, which only partially explains your 2.5mm measurement. I'm guessing there was also a bit of warping in your print, so I made the screw holes larger to allow for 1mm of play. Let me know if you're still having issues. Thanks for the feedback!

There is no warping. If you measure the zmr frame you will see that the front two holes are 2.5mm closer together than the next set. If you look at other mounts similar to yours you will see the front holes are in further from the edges than the back holes. For example: http://www.thingiverse.com/thing:980513

Xiaomi Yi ZMR 250 Mount
by didymus

Ah got it. I was able to measure 34mm on rear holes (center to center) and 32mm on front. Uploaded Rev D