Parametric Herringbone Gear Set for Greg's Accessible Wades
by triffid_hunter, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
uploaded my latest script which I've worked on a lot. It's generating some nice gears now.
Also updated the STL, ratio is 45:11, nut trap should fit perfectly straight off the bed now.
This is a detailed part (due to the tooth profiles) so use your smallest nozzle.
Print in PLA, it will last a lot longer due to being harder than ABS.
Set 0 extra shells (skeinforge)/ 1 perimeter (slic3r) because you can get hollow teeth with extra shells/perimeters.
Use 80-90% infill. I've already removed lots of plastic, what's left is what's needed. If your infill is too low, the most likely failure is the nut trap in the small gear will break.
You'll need really good cooling to do the base of the small gear properly. When the large gear is finished, crank your fan up to max, perhaps convince your slicer to slow it down a little too.
Select a service to print this Thing and ship it to you
Parametric Herringbone Gear Set for Greg's Accessible Wades by triffid_hunter is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving triffid_hunter a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure triffid_hunter would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).