Printable Ball Bearing Upgrade
by triffid_hunter, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Added a chamfer to help the belt drop into the groove instead of catching on the side and making clicking sounds.
UPDATED 23 March 2012
Print with 0.1mm layer height if you dare!
Use 0.5mm extrusion width, or adjust numbers in scad.
can be used to tune your E steps. if they won't fit together, E steps is too high. if they're loose, E steps is too low. They should click together firmly straight off the bed.
For extra points, your pair must able to be taken apart by hand with some effort when empty but become much tighter when you put the bearing in ;)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Printable Ball Bearing Upgrade by triffid_hunter is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving triffid_hunter a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure triffid_hunter would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).