Knob for rotary encoder or potentiometer

by llegoff Oct 14, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi, Nice work but customizer don't work :(

Great thanks! got a load of 10k Pots and these fit perfect (I also did at 98% in simplify) as 100 % was just too baggy.

Nice knob! :) Thanks again.

ok I got a hot tub and have been using pliers to change the temp on the dial for about a year I finally looked up the knob for the dial online 15 bucks!!! plus 5.95 shipping (I live in Alaska) I find this knob and think it costs 3 cents and 10mins to make at 0.3mm 20%infill so I'll make a few scale it up till it fits perfectly then do it at at a smaller layer height with nylon (avoid temp issues) at 100% infill and the unscaled print slipped on no problem but it could fall off easy so the second I made at .98 scale and boom perfect tightness can slip on, you have to force it off the dial was spot on not sure if I got lucky or if its standard but this saved me over 20 bucks thank you llegoff

This will work great for my record player that's missing a knob.