Side Release Buckle 3/4 inch
by UniverseOfDesign, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a side-release buckle or parachute buckle that works with 3/4 inch straps or 'webbing'.
I modeled this so I could print a replacement for a broken clip on my pack. Originally printed in PLA, which has been surprisingly functional so far, but I've reprinted in PET+ which has a much better flexible quality to it and should last far longer.
Prints best with support everywhere, especially for the female side of the buckle.
Is most functional when printed in PET+ or similar, but also works in ABS, PLA, etc.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Side Release Buckle 3/4 inch by UniverseOfDesign is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving UniverseOfDesign a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure UniverseOfDesign would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).