Someone requested a 3D printed copy of this stylized duck based on some plans from a wood turning project. It was easy enough to make a 3D model. I first tried printing the duck as one piece vertically, but the overhangs were a problem. So I split the duck body down the center and printed 2 mirrored halves. This turned out much better.
Print 1 of the Duck Body Half then a 2nd one as a mirror image. Glue them together and paint if you like.
Print the Duck Bill, paint, and glue together with a short piece of 3mm filament.
Let your newly hatched duckling roam in the garden.