by ravisheth, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
CellStruder is a 20mL syringe extruder powered by a NEMA stepper motor, capable of of precise liquid extrusion at the microliter level. Originally developed in Jeff Tabor's lab at Rice University, this device is currently being used for cell printing, enabling research in synthetic biology, biological pattern formation and engineering of cellular logic. An example print of E. coli cells expressing green fluorescent protein is shown above as well as microscopy of printed cells.
1x Motor Plate
1x Back Plate
2x Side Plate
1x Needle Holder (note, must be printed with supports)
1x 8mm threaded rod (100mm length)
1x 8mm linear bearing
1x 8mm linear rod (>100mm length)
10x M3x10mm screws
1x NEMA 17 Motor
1x 5mm to 8mm coupler
1x 8mm Hex Nut
Tubing width can be variable:
1x Male Luer Adapter (1/16")
1x Female Luer Adapter (1/16")
1m 1/16" Silicon Tubing
Luer syringe tips (>20 gauge recommended for precision applications)
Uses 20mL BD syringes
Print all parts & obtain all BOM materias
Screw NEMA motor to motor plate with 4 screws
Attach coupler and 8mm threaded rod to motor
Screw side rails to motor plate
Tap 8mm linear bearing into chassis
Screw hex nut onto threaded rod and fit chassis into threaded rod
Back plate will snap in
Slide in 8mm linear rod to hold assembly together
Place syringe and hold in place with 2x screws
This printing apparatus can be used for printing of any liquid or viscous gel. This device was developed in the Tabor Lab at Rice University for printing E. coli in defined patterns, for synthetic biology research in pattern formation and engineering cellular logic. An example print of E. Coli cells expressing green fluorescent protein is shown in a 100x15mm petri dish with the text "NSF EFRI", the grant this research is supported by. Fluorescence microscopy is shown of the entire printed "filament" as well as higher resolution of the printed cells boundary.
Please contact [email protected] with any questions. Thanks!
Edit, personalize, or revise this Thing
CellStruder v1 by ravisheth is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ravisheth a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ravisheth would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).