by yeg3d, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Add Ghost Bat to your Halloween decorations this year. He is as scary as he is cool, with multiple loops along his spine and wings, you can hang him in multiple orientations. All you need is a push pin and some fishing line.
Remixed from our Bat models:
Orientation: From an upright position, rotate the model backwards 150 degrees for good and minimal support.
Printed on a Type A Machines 2014 Series 1 3D Printer
Printed with Real White PLA from 3D Solutech
Printed with support, 55 degree overhang angle
Printed with a brim, 20 lines
250 microns (0.25 mm layer height)
206 mm Width (8 inches)
6h Print Time
0.8 mm Shell Thickness
6% Fill Density
80 mm/s Print Speed
0.4 mm Z hop when retracting
22.35 m of filament used
230C Print Temperature
Sliced with Cura
Modeled with Z Brush
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Ghost Bat by yeg3d is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving yeg3d a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure yeg3d would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).