by Davision3d Oct 28, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

Howd you make them shinny?

From the 'Post Printing' section under 'Thing Details'

"I used a aceton vapor finish for my ABS printed Blobbies. Just soaked some paper towels with aceton and hanged them on the side inside a non ABS plastic box. Put the Blobbies inside with the lid on top and waited a few hours til the vaporized aceton reacted with the ABS and with it made it smooth. The eyes I have sprayed additionally with clear coat."

I am confused with the sizing terms. I use a MakerBot Replicator 2, so is there any way you can tell me which eye would work for a maximum size on the Replicator 2?

If you print the Blobby at 150% or higher print the eye Eye-for150Percent.STL at the same size. When you print the bobby and eyes higher as 150% the eyes could fall out again, while when you print it all at 150% the eyes should fit in perfectly, rotate around and can't get out again.

hoouuu qu'il est mignon <3

cool d'avoir séparé les yeux et pupille pour faire différente couleurs :)

Awesome, love your sculptures!