Have you ever thought about how horrid it would be to loose 1 or more legs? How horrid it would be to never walk? Of course, you can buy prosthetic legs, but they are ridiculously expensive. This is where my leg comes in handy. This leg is designed to be cheap, so you can print it from your own printer. Once you have printed the 2 part foot, one for each leg, it is very easy to assemble. An interlocking joint between the leg and the foot allows a quick and easy snap-fit. This joint also allows you to move the foot in 360 degree angles, something even a normal foot cannot do. When the foot is in impact with the ground, the joint will automatically adjust itself, making the foot go down, just like the foot of a human. The rugged sole of the foot also provides easy walking or running on all terrain. The size for this leg is a one size fits all. You just put what is left of your leg inside the hole and then take a long thick piece of filament and string it through the holes on the outside and then tie it like a shoe. If you need to adjust the height, you can do so on the printing app. So download this leg, and be able to enjoy the happiness of walking, and smile, that technology enhanced your life.