Funneled Bottle Adapter
by Makulator, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Refill bottles rarely fit on their counterparts, you have to hold them by hand all the time. Creamy fluids like laundry detergents can take a long time, a boring process.
Enter the customizable bottle adapter. With its integrated funnel, nothing drips along the adapter and outside the bottle, and everything is kept clean.
Check the resulting STL, with reasonable parameters there should be no need for support structures. The inset parameter must be just large enough to leave room for the wall of the lower bottle. Adjust with the heights of the cones (inner and outer) to minimze overhang angle.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Funneled Bottle Adapter by Makulator is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Makulator a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Makulator would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).