ORDBot Spool Holder
by Looper, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
ORDBot Spool holder that mounts to the Z Axis maker rails. One for left and one for right hand mounting
Requires two 5mm x 16mm screws and two T-Nuts per side for mounting.
UPDATE: I have uploaded version 2 that has a tilted angle so the spools do not want to "walk" away. Redesigned the filament hole to be over the spool and allow for the filament to be removed from the hole with out needing to remove from the extruder.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
ORDBot Spool Holder by Looper is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Looper a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Looper would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).