Can be setup with either V slot or traditional round rod Guides
handy for upgrade from smaller units
The correct mounting holes for the PSU 4mm mount four patterns
1, First pattern for Chinese s-360- 12
2, Second pattern Mean Well Power Supply RSP-500-12 (recommended for large beds).
3, Third pattern for Mean well Power Supply RSP-750-12
4, Fourth Pattern for Mean Well Power supply RSP-1000-12
X plates included for V slot configuration
1, Micron 3DP all metal dual extruder plate
2, Micron 3DP all metal single Extruder plate
X plate motor mount and idler plate included v slot configuration
Has Y-axis lead screw capabilities (extra parts required)
1, does have metal lead screw nut to bed mount (verify mating edge is square)
2, recommend printing the printed parts before the conversion
Two spool mounts included
Top has additional mounting points for different accessories
has Cordobesa influence
1, Y Motor mount is now slotted for belt tensioning and braced for single mount plate.
2, Includes Extruder hard parts and mounting of Dual extruders in base form.
Most other PRUSA i3 steel accessories interchange except Y idler prints
Wide enough to accommodate dual extruders almost full 12" travel of work area
This Kit is basically Like any other P3Steel Printer, only on larger format 12" Versus the typical 8"
Assembly of this printer follows the path of the Smaller version Leonardo and Cordobesa printers.
This Kit Does come with A lot of Extra cut Parts this allows for many configurations
NOT Recommended for People that are not mechanically inclined can be confusing
This Kit only includes the Cut Steel Parts no electronics or Mechanical Parts included
has all needed cut parts for all metal setup with V slot rails
1, if using Round rod rails then With the NCS Z X Travel parts
2, no printed parts needed to get to printing
3, This File is free would need to be cut locally http://www.thingiverse.com/thing:1154729/#files
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.