This is a couple of parts that allows mounting an odroid XU4 onto a Mediasonic ProBox HF2-SU3S2. The obvious use case for this is a NAS. From my tests, it blows BanaNAS and raspberry PI nas out of the water.
To save time and plastic, this is 2 parts you print and glue together. The official top odroid xu4 case fits this.
Parts links for USA -
The fan cover is printed with 0.3mm layers, 10% infill throughout, and support for the rectangle at the top.
The case bottom I printed with 2 settings. From the bottom up to 7.5mm, I used the same settings as the other piece (0.3mm layers). Then from 7.5mm on up, I went with 0.1mm layers to get better detail.
The two pieces are purposefully a tight fit together. You may need a razor blade or dremel to work the top of the fan cover so it fits inside the hole in the other piece. I laid down a bead of hot glue and fit the two together and they aren't coming apart anytime soon.