Filament Holder for printrbot GO
by ei8htohms, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a filament/spool holder for the printrbot GO, designed to be used in conjunction with the Corner Supports I designed for it. The SCAD is scalable to the Corner Support size and thickness, bar diameter, length of arms (extension), etc.
I've set it up with Customizer support, but the resulting STL is just barely small enough for the GO to print successfully. If you want greater extension or use larger Corner Supports then you'll probably have to break it up into multiple STLs for printing. The included STL is for Corner Supports that are 31 mm and 6 mm thick.
Mini bungie cord not included.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Filament Holder for printrbot GO by ei8htohms is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ei8htohms a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ei8htohms would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).