Up Date to my Dual Extuder and Fans
by kb3lnn, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
As with my earlier one this one only uses one Fan with plenty of air flow. I used this one
http://www.amazon.com/gp/product/B00EL938E6?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00 Five of them for around $11.00
and it's a 5 volt fan but you can run it at 12 volts with no problems. This way you get a good bit of air flow. I have been using this for a little over 7 mounts now and had no problems. I do recommend using a variable voltage regulator so that you can set it to your need on the spot. I used this
from Amazon you get ten for around $6.00. and it is very easy to build it.
Created with Design Spark Mechanical. http://www.rs-online.com/designspark/electronics/eng/page/mechanical
Have a great day! :-)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Up Date to my Dual Extuder and Fans by kb3lnn is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving kb3lnn a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure kb3lnn would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).