ad X

by alpinedrones Nov 18, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

Where does the fpv cam fit on this?

My build has started... I'm trying to use up some spare bits I have laying about....

I'm using the 180 frame, with 1806's - Unfortunately everything I have limits me to a 3s power train at the moment.

I'll be adding a few custom stack tiers to suit what I use, I'll let you know how it goes ;-)

which version can run 5" props?

the 192 version swings 5" props. just recently built one for a friend. great quad :)

what size stand-offs are you using on this design?

35mm m3 standoffs. I'm currently experimenting with 20mm standoffs, but it's really hard to fit everything into 15mm less space.

Great job. Thanks for sharing

a 200mm that can run 2204 motors and 5 inch props just like this would be perfect. I am a big fan of Shen Drones Krieger that is similar to yours in the way it is stacked instead of a long middle section creating extra drag.

I'll upload the prototype files soon. I've flown a 192 with 1806 motors and 5in props for a few months now. Flies extremely well, but I haven't tried it with 2204 yet.

Also mate the vtx hole doesn't allow the vtx to sit anywhere comfortably, well that's what I found :) maybe moving the hole so it can be stuck to a side etc?

Thanks again for the input :) I've been thinking about all the points that you mention and I can tell you that a new fpv camera mount will soon be available. I'm currently working on that! thanks

hey mate sweet design are you thinking of also being able to mount the cam through the front of the top section, just might protect some of the board :)

thanks! I'm thinking about that!