Contents
Tags
Remixed From
Design Tools
License
Liked By View All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing TagMakes View More
Summary
Multiple configuration for lightsaber stands. This is a work in progress.
Print Settings
Printer:
XYZprinter AiO Da Vinci
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
1.5 mm
Infill:
35%
Notes:
Made to lay flat and print smoothly. The emblems in the risers are small and may not print when extruder is larger than .4 mm.
How I Designed This
The DC connector is a power jack found on Ebay. http://www.ebay.com/itm/221939865049?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
The LED strips are also from Ebay. They can be found in multiple colors to match the color of the lightsaber to be displayed. http://www.ebay.com/itm/321842921529?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Here is the power source. http://www.ebay.com/itm/321635171211?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Have not decided if I will put a on/off switch in but should have plenty of space if needed.
The LED should last over 50,000 hours and provide many years of enjoyment. The LED's can be cut every 3 then soldered together +/+ -/-. I did not heat shrink the connections for easy viewing but do recommend. The first one shows what a clean look it can have.
Can also be found at http://www.instructables.com/id/Lightsaber-Base-LED/
More from Props
