Paintball Muzzle Brake - Wasteland Sniper Rifle
by FreshPrints3D, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a 3D printable muzzle brake for .68 cal paintball guns. I designed it for my Wasteland Sniper Kit, a 3D-printable paintball kit for the Tippmann 98 Custom show in the pictures above.
This muzzle brake should fit most 1" outer diameter paintball barrels, which is a standard size. You can also use electrical tape or set screws to further secure the mod.
Visit FreshPrints3D.com for more 3D printable paintball designs!
0.1 - 0.4 mm
This is a pretty simple print. I recommend using at least 3 shells and 25% infill minimum.
The muzzle brake should fit snugly onto 1" outer diameter paintball barrels. Electrical tape or a set screw can be used to further secure the muzzle brake.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Paintball Muzzle Brake - Wasteland Sniper Rifle by FreshPrints3D is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving FreshPrints3D a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure FreshPrints3D would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).