A nice way to create multiple levels on a wargaming table. Very small printing time. An easy little project!
First, choose a floor style (currently two choices).
Then choose a height of truss. The high truss (01) requires two separate prints of the same floor.
You will then need to consider what brace pieces you will need. The large brace is only useful for the high truss, the angled braces are only useful for the L-shape floor.
More to come!
There is also an optional ladder that you can glue where ever you like, just be careful when you pull it off the print bed as the ledge breaks off easily.
You may need to file some edges down to fit the beams into the grooves. And you'll definitely need some glue to make it all stay together!