I made a Bracket for the DDJ-WeGO3. The bracket is made from acrylic sheet with a foam padding and steel plate and tube on the back to attach it to a microphone stand or something like that. I used a lasercutter, heatgun, clamps, glue, grinder, drill, welding torch and rivetgun.
I used the svg file to lasercut acrilyc sheet, the foam and the plates for the fake wooden controller.
you'll first need to make the fake wooden controller. The one in the svg can be used for a bracket without padding. If you want a bracket with padding you'll need to add some extra thickness to the fake wooden controller. You can use the fake as a jig to get a nice precise bend. You'll need to position the acrylic onto the wooden jig and clamp it. With a heatgun you can heat the 3 fingers and once they are soft you bend them around the wooden jig. I did the little finger that goes into the screw hole last.
I used a grinder to cut a steel plate and a tube to the right size. the tube and plate were welded together and painted.
i glued the foam to the bracket and then used rivets to attach the acrylic to the steel.