This is a piece to hold the HS1177 to a ZMR 250 frame without the bracket included with the camera. The screws needed to secure it are the ones that come with it, no need to use others.
It allows for a tilt of about 30 deg.
The weight of the printed part in PLA is about 3,35g.
I printed it at 50 mm/s with a 0.2 mm layer resolution, in a Folger Tech Prusa i3 2020.
Folger Tech Prusa i3 2020
To get a perfect fit, you might have to trim the tabs that hold it onto the plates.