Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Nikon DIY GPS Holder
by cyrozap, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I designed this to enable me to attach my DIY Nikon GPS ( http://cyrozap.com/2011/08/13/diy-nikon-d5100-gps/ ) to my camera so I don't have to hold the module while trying to adjust my zoom.
I haven't tested this with the flash yet, so there might not be enough clearance between the GPS and the flash to allow you to use the flash.
Print (as it's shown works fine), then try to fit it in your camera. If it doesn't fit, do a little sanding until it does. Use either velcro, strong double-sided tape, or superglue/epoxy to attach the GPS module to the hotshoe insert.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Nikon DIY GPS Holder by cyrozap is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving cyrozap a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cyrozap would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).