Loading
TnaTmr

Fillet Gauge

by TnaTmr Dec 8, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

Thank you for this thing! Thumbs up to you!

  • Posted with 3D Geeks Thingiverse Browser App

i didn't know this tool existed, i always wondered how to measure a curved corner. i used to freehand them. thank you

GEEZ Thanks! Turns out i need more than just calipers ;)

Wow, this looks like it will be super handy, so simple yet so useful. Cheers!

Thanks for the design!

Whenever I make similar ruler type models the numbers (text etc) easily pop off the surface. :/

On mine the numbers didn't adhere at all, just globbed up on the end of my hot end, I ended up adding them with a Sharpie marker. I think it's actually a problem with how Cura reads the STL. I noticed in OctoPrint that the gauge itself previewed fine in the gcode viewer, but what should have been the last couple layers for the numbers actually was being interpreted as a bunch of separate layers.

I sliced with Cura as well. What size nozzle do you use. It might also have something to do with you settings. I can share my Cura profile if you wish.

greater infill, more outlines, and more top layers help with this. Also check your perimeter overlap and perhaps increase it a bit.

Did you have any problems printing this? Also, if you are using Fusion 360 I can tell the size and font I used in this design.

I didn't print this one. I do modeling in Rhino 3D > OBJ > Cura.

Great idea well done this thing i need desperately.

Great little print, very small form factor and prints very quickly and easily. Its also very accurate and is something I've unknowingly needed for a long time. Keep up the good work :)

Thank you. Pleased you liked it :)

This is brilliant. However, I found that these are actually made as a real world product called Radius Gauges.

Probably gonna buy a set on Amazon.

Good work.

Much appreciated, came up stumped when I wanted to design a phone case for a phone with a lot of rounded curves both seen from the front, side and top/bottom and tried in vain to use my calipers, printing one of these atm.

Might want to turn the .stl to make it the right orientation for printing btw, yes we can do it ourselves but making tens-hundres-thousands or people do that step instead of you doing it once is a bit... silly imo.

Tebrik ediyorum seni.. Gerçektek çok işe yarar bir klavuz hazırlamışsın, biz tasarımcılar için bulunmaz bir nimet değerinde olduğunu düşünüyorum. Sana önerim bu tasarımını kredi kartı ölçülerine çekip daha portatif, daha toplu bir hale getirmen bu sayede cüzdanda taşınabileceğinden çok daha efektif bir kullanımı olacaktır.

Öneri için teşekkürler, iyi bir fikir ve hemen üzerinde çalışmaya başlayacağım :D

Your gauge looks like it's very well made and handy for designers as well.
Not to nitpick T, but when I had mechanical drafting way back when it was T squares and triangles I was taught that an inside radius was a fillet and an outside was a "round". While both are sometimes called fillets, a true fillet serves to strengthen the part and in the case of welding comes naturally with the process.
see -
https://en.wikipedia.org/wiki/Fillet_(mechanics)

Keep up the good work

Hey, thanks for pointing this out. As an amateur in these fields it can be difficult at times to know the correct terminology. It never hurts to learn to speak precisely about a subject.

I just use the term fillet because it says it in the Fusion 360 program, but thanks for informing, thats something that I had never heard before, thank you again :D

Hi Tuna,

Thank you so much for designing this! This is really helpful and useful, I'm printing it right now! It's really great to see you taking a problem and solving it with a simple design. I'm going to share it on the Adafruit blog on Thursday and show it on 3D Hangouts :-)

Keep up the great work and remember to keep on'a makin!

–Noe

Im so happy that you liked the idea. And thank you very much. I always watch your shows on Adafruit so thats where I got the idea anyways, thanks again :) Your designs inspire me for new designs.

-Tuna

This is awesome. i was just taking to my friend about making one of these. Thank you.

Happy to see that you have liked it!

This is the second filet guage I have seen on Thingiverse. Love the idea as I have always wanted to print a case for my phone, but never had the dimensions for any of my "niche" devices.

I am curious though about the 3mm and 5mm curves on either end. Did you just pick the sizes out of the air or is their a specific need for those measurements.

Keep up the good work.

Three and five are a couple of my favorite Fibonacci numbers, too bad it doesn't go to thirteen.
Maybe because some Thingiversers might suffer from triskaidekaphobia.

The 3 and 5 at the ends is for inside curves, which isn't as much seen as an outer fillets, but its just there in case you need it.

My guess is the space was available so why not use it for something useful? Getting ready to print this myself as I was getting ready to design a mount for a small box with curved corners. Wasn't looking forward to the guessing game. :)