Blackmagic Pocket Cinema Camera Screen Hood
by photoresistor, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Despite its best qualities, the screen on the Black Magic Pocket Cinema Camera is one of its worst. One of the cheapest ways of increasing the outdoor usability of the camera is adding a screen hood.
Best results from printing in any black filament, ideally one with a matte finish.
Add some thin strips of velcro to attach the screen hood to the camera body, and if necessary, make a small flag of gaff tape to close the gap at the op of the screen.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Blackmagic Pocket Cinema Camera Screen Hood by photoresistor is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving photoresistor a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure photoresistor would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).