Classical Spiral Vase
by markwheadon, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A delicate vase with twisted undulations – flower not included! If you print this then please click on "I Made One" and upload a picture.
The is not your usual Yada Yada – it won't print properly if you just throw it at the slicer.
I suggest you slice this in spiral vase mode, with a reasonably thick perimeter width, say 0.5mm.
However, the base needs to be solid as its inward slope is far too steep to be hollow in vase mode.
- Spiral Vase mode
- No infill
- One perimeter
- Perimeter width 0.5mm or more
- 0.2mm layer height
- About 6mm of solid base, so at 0.2mm layer height that's 30 solid bottom layers (really!)
- No top layers
If you don't have a spiral vase mode in your slicer then not to worry, it'll print fine with the above settings, minus the spiral option – perhaps with the "start each layer at a random point" ticked if your slicer has that option (to avoid a vertical seam).
This stands 18cm tall, but can be scaled to whatever size suits. If you change its size then don't forget to scale the number of solid bottom layers accordingly.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Classical Spiral Vase by markwheadon is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving markwheadon a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure markwheadon would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).