!!!WIP!! total design still under constuction
IE 25mm Strength Block with M8 screw holes.
Building a large build makes the frame unstable.
By adding these blocks you can strengthen up the 25mm frame, example:
a 1000mmx1000mmx500mm frame can have 12 prints in it with 12x500mm 25x2 tube as support
Added > TC_MPCNC_IE_25_Strength_Block_M8 for 4X bottom bars on floor
Added > TC_MPCNC_IE_25_Strength_Block_B_M8 for 4X vertical bars that hold up frame
Added > TC_MPCNC_IE_25_Strength_Block_C_M8 for 4X vertical bars that hold up frame
Bed = HotGlue coating
First Layer: 0.3mm T225C B75C
Others: 0.2mm T220C B30C
On end printing: heat bed to 85C to release print from HotGlue