by chpola33 Dec 10, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

I used 4c LiPo 14.8V battery and weight around 2 to 2.5 kg. It can fly around 30 minutes. It is all up to you how configure the quad.

Beautiful design! Could you share the as-built all up weight and flight times? Also how much are you asking for the .stl files?

please visit our website http://maxvantageasia.com/max3dPrints/index.html to check it out, thank you for your interested.

OMG....that's crazy good....so impressed!!

LED I used is 10mm OD and is very common on the market. It is also a good idea to have a cover instead of LED if people don't use the lights.
I'll post it later.
As for the 34mm carbon tube, I don't think I'll amend this part because 2 XRotor 40A are put inside of that tube and the strength we need to support the arm. If you have problem to local these tubes, please do let me know and I may arrange for that.

Also, it is hard to find 34mm carbon fiber tubes, they are not easily available. Do you have the ability to resize these dimensions easily to something a little smaller? Maybe 30mm OD

What lenses did you use for the LED lights? I see these lens all over the model, looks like a good way to determine front front the back when at range rather than placing on the arms. Also it might be an idea to make a cover to go over these holes if someone doesn't want to use them. I would like to put the clear lens in, I just don't know where you purchased them from.

Compartment at the real body can put two battery, it can fit 4C 5500 mAh Lipo for motors and a 2C with size 75x40x20 for others.

What is the max size lipo you can use, dimension wise. I cannot see in the pics where the lipo goes, assuming inside somewhere by a quick hatch / slot or something?

thank you is a beautiful machine thank my congratulations

Yes, will post rest of the parts day by day, Thank you for your interested!

can put the rest of the pieces to print?

will you post the files for the frame? Thanks.